From the original community.whatsupgold.com posted by Rich Makris.

Here is the default example script from the WhatsConfigured stand alone application. 

The text version is below for copy/paste and the xml version is attached for the import function.

# This script uploads firmware to a IOS device using TFTP

# NOTE: Updating router software can be a complex operation. YOU ARE RESPONSIBLE to

# ensure that you are following all of the proper vendor procedures.

# Wait times in this script may be longer than usual. It may be necessary to update

# the WaitTimeout in the device credentials

# DEFINE the following VARIABLES

# Filename of image being uploaded

# This file must be in the TFTP server root directory

SourceFilename = SOURCE-FILENAME-HERE

# File name given to the image when stored on the device

DestinationFilename = DEST-FILENAME-HERE

# Used if device contains a file with the same name as the destination file name

# Change to 'y' if you would like to overwrite the device file

OverWrite = n

# Indicates whether the current image should be erased before copying.

# Note that there must be enough memory for both images if the flash is not erased

EraseFlash = n

# TFTP Server IP Address

TFTPServerAddress = TFTP-IP-ADDRESS-HERE

# Used to verify the integrity of the uploaded image

# Comment/Remove this variable if you do not want to verify the image

ImagePath = flash:$(DestinationFilename)

# Used to update boot location after the image is loaded

# Comment/Remove this variable if you do not want to update the boot location

BootLocation = flash:$(DestinationFilename)

# If you would like to restart the device after image upload uncomment this variable

# NOTE: It doesn't matter what the value of this variable is, if it is defined the reload

# command will be issued

# RestartDevice = T

# BEGIN SCRIPT

# UPDATE command prompt to handle queries

CommandPrompt = /(>|#|\]\?|m\]) ?/

@login

@enable

copy tftp flash

# PROMPT: Address or name of remote host []?

$(TFTPServerAddress)

# PROMPT: Source filename []?

$(SourceFilename)

# PROMPT: Destination filename [SOURCE-FILENAME]?

$(DestinationFilename)

# QUERY PROMPT: Do you want to over write? [confirm]

{/over write.+confirm\]/, "$(OverWrite)"}

# PROMPT: Erase flash: before copying? [confirm]

$(EraseFlash)

# QUERY PROMPT: Erasing the flash filesystem will remove all files! Continue? [confirm]

# Shown if ErasePrompt is y or yes

{ /.*continue.*\]/, "y" }

@if ImagePath

verify $(ImagePath)

# Exit if the image doesn't verify

{/warning.*/, "exit"}

@endif