
Community Archive (Customer) asked a question.
Hi,
There is a variable which is from SNMP and seems it is different:
for this example OID = 1.3.6.1.4.1.37447.1.2.1.13 | 29
If I create a monitor by using "SNMP performance monitor" and without check "Plot raw values". The result of the value is what I want.
But if I using "Active Script Performance Monitor", create a reference variable with same OID, the result of the value is not what I want.
And I found that the value come from "Active Script Performance Monitor" is as same as using "SNMP performance monitor" and with check "Plot raw values".
So may I know how can I get the value is as same as "using "SNMP performance monitor" and with check "Plot raw values" in "Active Script Performance Monitor"? Because there is two value need to be calculated.
Many thanks.
Sounds like you need to put in a call to Tech. Support to get it reported and dev to look at it.
It will show
because I found this
which the volloReads is (after select the "Plot raw values")
and the ioReads is
but this is what we want by reference variable (Disabled the Plot the raw value)
What does it show if you use the SNMP MIB Walker tool for the Same OID?