[icf-dev] Error running repository maintenance tool - Forum - OpenEdge Development - Progress Community

[icf-dev] Error running repository maintenance tool

 Forum

[icf-dev] Error running repository maintenance tool

  • Hi,

    I downloaded the latest version of dynamics 2 using a complete checkout

    in WinCVS yesterday morning and did a complete compile using the PBUILD

    utility. I created a new repository database using the

    src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the

    file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the

    src/icf/db/icg/dump directory.

    I have no problem running most of the dynamics tools (including new

    tools like the container builder).

    Only (?) the repository maintenace tool does not work at all. When I run

    it from the appbuilder menu (build) I get the nasty "OK to quit

    AppBuilder?" message. When I run it from the dynamic launcher the

    waiting clock is shown for a while but nothing else.

    As this ended up with no success I loaded all (819) .ado files.

    Am I missing anything? ADO or sourcecode? Or is this a known bug? Any

    help appreciated.

    Best regards,

    Mike

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Hi Mike,

    What version of Progress are you running?

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people who

    are trying to understand the question.

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 09:18

    To: dev@icf.possenet.org

    Subject: Error running repository maintenance tool

    Hi,

    I downloaded the latest version of dynamics 2 using a complete checkout

    in WinCVS yesterday morning and did a complete compile using the PBUILD

    utility. I created a new repository database using the

    src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the

    file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the

    src/icf/db/icg/dump directory.

    I have no problem running most of the dynamics tools (including new

    tools like the container builder).

    Only (?) the repository maintenace tool does not work at all. When I run

    it from the appbuilder menu (build) I get the nasty "OK to quit

    AppBuilder?" message. When I run it from the dynamic launcher the

    waiting clock is shown for a while but nothing else.

    As this ended up with no success I loaded all (819) .ado files.

    Am I missing anything? ADO or sourcecode? Or is this a known bug? Any

    help appreciated.

    Best regards,

    Mike

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Hi Mark,

    I am using 9.1D.

    This is what Help - About returns:

    PROGRESS AppBuilder

    Version 9.1D

    PROGRESS Version 9.1D as of Wed May 8 17:24:00 EDT 2002

    Mike

    -Ursprüngliche Nachricht-

    Von: Mark Davies

    Gesendet: Dienstag, 20. August 2002 11:26

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Hi Mike,

    What version of Progress are you running?

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people

    who are trying to understand the question.

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 09:18

    To: dev@icf.possenet.org

    Subject: Error running repository maintenance tool

    Hi,

    I downloaded the latest version of dynamics 2 using a complete checkout

    in WinCVS yesterday morning and did a complete compile using the PBUILD

    utility. I created a new repository database using the

    src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the

    file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the

    src/icf/db/icg/dump directory.

    I have no problem running most of the dynamics tools (including new

    tools like the container builder).

    Only (?) the repository maintenace tool does not work at all. When I run

    it from the appbuilder menu (build) I get the nasty "OK to quit

    AppBuilder?" message. When I run it from the dynamic launcher the

    waiting clock is shown for a while but nothing else.

    As this ended up with no success I loaded all (819) .ado files.

    Am I missing anything? ADO or sourcecode? Or is this a known bug? Any

    help appreciated.

    Best regards,

    Mike

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Mike,

    Are you running Appserver? If so, what do your client and server session

    settings look like (in your .xml file)? Are you sure you're running on the

    latest ADM2 stuff (PROPATH)?

    Also, although this may not be relevant to the issue you're experiencing,

    you'll have to set your site number.

    Regards,

    Neil

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 11:44

    To: dev@icf.possenet.org

    Cc: marksd@mip.co.za

    Subject: AW: Error running repository maintenance tool

    Hi Mark,

    I am using 9.1D.

    This is what Help - About returns:

    PROGRESS AppBuilder

    Version 9.1D

    PROGRESS Version 9.1D as of Wed May 8 17:24:00 EDT 2002

    Mike

    -Ursprüngliche Nachricht-

    Von: Mark Davies

    Gesendet: Dienstag, 20. August 2002 11:26

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Hi Mike,

    What version of Progress are you running?

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people

    who are trying to understand the question.

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 09:18

    To: dev@icf.possenet.org

    Subject: Error running repository maintenance tool

    Hi,

    I downloaded the latest version of dynamics 2 using a complete checkout

    in WinCVS yesterday morning and did a complete compile using the PBUILD

    utility. I created a new repository database using the

    src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the

    file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the

    src/icf/db/icg/dump directory.

    I have no problem running most of the dynamics tools (including new

    tools like the container builder).

    Only (?) the repository maintenace tool does not work at all. When I run

    it from the appbuilder menu (build) I get the nasty "OK to quit

    AppBuilder?" message. When I run it from the dynamic launcher the

    waiting clock is shown for a while but nothing else.

    As this ended up with no success I loaded all (819) .ado files.

    Am I missing anything? ADO or sourcecode? Or is this a known bug? Any

    help appreciated.

    Best regards,

    Mike

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Hi Mike,

    That is what we are running on too and the problem is not seen with the

    latest download as of this morning.

    The only thing I can think of is to maybe do a complete new download of

    POSSE MAIN and a fresh PBUILD.

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people who

    are trying to understand the question.

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 10:44

    To: dev@icf.possenet.org

    Cc: marksd@mip.co.za

    Subject: AW: Error running repository maintenance tool

    Hi Mark,

    I am using 9.1D.

    This is what Help - About returns:

    PROGRESS AppBuilder

    Version 9.1D

    PROGRESS Version 9.1D as of Wed May 8 17:24:00 EDT 2002

    Mike

    -Ursprüngliche Nachricht-

    Von: Mark Davies

    Gesendet: Dienstag, 20. August 2002 11:26

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Hi Mike,

    What version of Progress are you running?

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people

    who are trying to understand the question.

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 09:18

    To: dev@icf.possenet.org

    Subject: Error running repository maintenance tool

    Hi,

    I downloaded the latest version of dynamics 2 using a complete checkout

    in WinCVS yesterday morning and did a complete compile using the PBUILD

    utility. I created a new repository database using the

    src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the

    file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the

    src/icf/db/icg/dump directory.

    I have no problem running most of the dynamics tools (including new

    tools like the container builder).

    Only (?) the repository maintenace tool does not work at all. When I run

    it from the appbuilder menu (build) I get the nasty "OK to quit

    AppBuilder?" message. When I run it from the dynamic launcher the

    waiting clock is shown for a while but nothing else.

    As this ended up with no success I loaded all (819) .ado files.

    Am I missing anything? ADO or sourcecode? Or is this a known bug? Any

    help appreciated.

    Best regards,

    Mike

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Hi,

    I did a new checkout of module posseall with the default branch and a

    complete compile using PBUILD.

    I am using the default icfconfig.xml file of this version. I am starting

    using the ICFDef sessiontype without AppServer connection.

    I found the European numeric-format as the cause of this error. If I

    change the numeric-format before starting the repository maintenance

    tools using session:numeric-format = "American" in a procedure editor I

    am able to run the tool! Setting the value back to "European" prevents

    the tool from being started again. I will log an issue.

    I use the European numeric format as a setting in my startup.pf file as

    I guess many Europoean customers are doing.

    Thanks for any hint's about session setting.

    Mike

    -Ursprüngliche Nachricht-

    Von: Mark Davies

    Gesendet: Dienstag, 20. August 2002 12:53

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Hi Mike,

    That is what we are running on too and the problem is not seen with the

    latest download as of this morning.

    The only thing I can think of is to maybe do a complete new download of

    POSSE MAIN and a fresh PBUILD.

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people

    who are trying to understand the question.

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 10:44

    To: dev@icf.possenet.org

    Cc: marksd@mip.co.za

    Subject: AW: Error running repository maintenance tool

    Hi Mark,

    I am using 9.1D.

    This is what Help - About returns:

    PROGRESS AppBuilder

    Version 9.1D

    PROGRESS Version 9.1D as of Wed May 8 17:24:00 EDT 2002

    Mike

    -Ursprüngliche Nachricht-

    Von: Mark Davies

    Gesendet: Dienstag, 20. August 2002 11:26

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Hi Mike,

    What version of Progress are you running?

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people

    who are trying to understand the question.

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 09:18

    To: dev@icf.possenet.org

    Subject: Error running repository maintenance tool

    Hi,

    I downloaded the latest version of dynamics 2 using a complete checkout

    in WinCVS yesterday morning and did a complete compile using the PBUILD

    utility. I created a new repository database using the

    src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the

    file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the

    src/icf/db/icg/dump directory.

    I have no problem running most of the dynamics tools (including new

    tools like the container builder).

    Only (?) the repository maintenace tool does not work at all. When I run

    it from the appbuilder menu (build) I get the nasty "OK to quit

    AppBuilder?" message. When I run it from the dynamic launcher the

    waiting clock is shown for a while but nothing else.

    As this ended up with no success I loaded all (819) .ado files.

    Am I missing anything? ADO or sourcecode? Or is this a known bug? Any

    help appreciated.

    Best regards,

    Mike

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Thanks a lot Mike for persevering with this one - we will get it fixed ASAP.

    Regards

    Anthony

    Anthony D Swindells

    Lead Architect, Progress Dynamics

    Progress Software Corporation

    aswindel@progress.com

    -Original Message-

    From: Mike Fechner

    Sent: Tuesday, August 20, 2002 7:52 AM

    To: dev@icf.possenet.org

    Subject: AW: Error running repository maintenance tool

    Hi,

    I did a new checkout of module posseall with the default branch and a

    complete compile using PBUILD.

    I am using the default icfconfig.xml file of this version. I am starting

    using the ICFDef sessiontype without AppServer connection.

    I found the European numeric-format as the cause of this error. If I

    change the numeric-format before starting the repository maintenance

    tools using session:numeric-format = "American" in a procedure editor I

    am able to run the tool! Setting the value back to "European" prevents

    the tool from being started again. I will log an issue.

    I use the European numeric format as a setting in my startup.pf file as

    I guess many Europoean customers are doing.

    Thanks for any hint's about session setting.

    Mike

    -Ursprüngliche Nachricht-

    Von: Mark Davies

    Gesendet: Dienstag, 20. August 2002 12:53

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Hi Mike,

    That is what we are running on too and the problem is not seen with the

    latest download as of this morning.

    The only thing I can think of is to maybe do a complete new download of

    POSSE MAIN and a fresh PBUILD.

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people

    who are trying to understand the question.

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 10:44

    To: dev@icf.possenet.org

    Cc: marksd@mip.co.za

    Subject: AW: Error running repository maintenance tool

    Hi Mark,

    I am using 9.1D.

    This is what Help - About returns:

    PROGRESS AppBuilder

    Version 9.1D

    PROGRESS Version 9.1D as of Wed May 8 17:24:00 EDT 2002

    Mike

    -Ursprüngliche Nachricht-

    Von: Mark Davies

    Gesendet: Dienstag, 20. August 2002 11:26

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Hi Mike,

    What version of Progress are you running?

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people

    who are trying to understand the question.

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 09:18

    To: dev@icf.possenet.org

    Subject: Error running repository maintenance tool

    Hi,

    I downloaded the latest version of dynamics 2 using a complete checkout

    in WinCVS yesterday morning and did a complete compile using the PBUILD

    utility. I created a new repository database using the

    src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the

    file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the

    src/icf/db/icg/dump directory.

    I have no problem running most of the dynamics tools (including new

    tools like the container builder).

    Only (?) the repository maintenace tool does not work at all. When I run

    it from the appbuilder menu (build) I get the nasty "OK to quit

    AppBuilder?" message. When I run it from the dynamic launcher the

    waiting clock is shown for a while but nothing else.

    As this ended up with no success I loaded all (819) .ado files.

    Am I missing anything? ADO or sourcecode? Or is this a known bug? Any

    help appreciated.

    Best regards,

    Mike

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org