AW: [icf-dev] Error running repository maintenance tool - Forum - OpenEdge Development - Progress Community

AW: [icf-dev] Error running repository maintenance tool

 Forum

AW: [icf-dev] Error running repository maintenance tool

  • Hi Mike!

    Thanks from the Swabians too;-) (probably nobody 'on the other side' will

    know

    what this means). We were running into this about two weeks ago and decided

    to go with V1.1 until 2.0 Beta is ready which is now obsolete (I hope).

    regards,

    Marc

    -Ursprüngliche Nachricht-

    Von: Anthony Swindells

    Gesendet: Dienstag, 20. August 2002 14:44

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Thanks a lot Mike for persevering with this one - we will get it fixed ASAP.

    Regards

    Anthony

    Anthony D Swindells

    Lead Architect, Progress Dynamics

    Progress Software Corporation

    aswindel@progress.com

    -Original Message-

    From: Mike Fechner

    Sent: Tuesday, August 20, 2002 7:52 AM

    To: dev@icf.possenet.org

    Subject: AW: Error running repository maintenance tool

    Hi,

    I did a new checkout of module posseall with the default branch and a

    complete compile using PBUILD.

    I am using the default icfconfig.xml file of this version. I am starting

    using the ICFDef sessiontype without AppServer connection.

    I found the European numeric-format as the cause of this error. If I

    change the numeric-format before starting the repository maintenance

    tools using session:numeric-format = "American" in a procedure editor I

    am able to run the tool! Setting the value back to "European" prevents

    the tool from being started again. I will log an issue.

    I use the European numeric format as a setting in my startup.pf file as

    I guess many Europoean customers are doing.

    Thanks for any hint's about session setting.

    Mike

    -Ursprüngliche Nachricht-

    Von: Mark Davies

    Gesendet: Dienstag, 20. August 2002 12:53

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Hi Mike,

    That is what we are running on too and the problem is not seen with the

    latest download as of this morning.

    The only thing I can think of is to maybe do a complete new download of

    POSSE MAIN and a fresh PBUILD.

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people

    who are trying to understand the question.

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 10:44

    To: dev@icf.possenet.org

    Cc: marksd@mip.co.za

    Subject: AW: Error running repository maintenance tool

    Hi Mark,

    I am using 9.1D.

    This is what Help - About returns:

    PROGRESS AppBuilder

    Version 9.1D

    PROGRESS Version 9.1D as of Wed May 8 17:24:00 EDT 2002

    Mike

    -Ursprüngliche Nachricht-

    Von: Mark Davies

    Gesendet: Dienstag, 20. August 2002 11:26

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Hi Mike,

    What version of Progress are you running?

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people

    who are trying to understand the question.

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 09:18

    To: dev@icf.possenet.org

    Subject: Error running repository maintenance tool

    Hi,

    I downloaded the latest version of dynamics 2 using a complete checkout

    in WinCVS yesterday morning and did a complete compile using the PBUILD

    utility. I created a new repository database using the

    src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the

    file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the

    src/icf/db/icg/dump directory.

    I have no problem running most of the dynamics tools (including new

    tools like the container builder).

    Only (?) the repository maintenace tool does not work at all. When I run

    it from the appbuilder menu (build) I get the nasty "OK to quit

    AppBuilder?" message. When I run it from the dynamic launcher the

    waiting clock is shown for a while but nothing else.

    As this ended up with no success I loaded all (819) .ado files.

    Am I missing anything? ADO or sourcecode? Or is this a known bug? Any

    help appreciated.

    Best regards,

    Mike

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Marc Braun wrote:

    Hi Mike!

    Thanks from the Swabians too;-) (probably nobody 'on the other side' will

    know what this means).

    Und warum nicht?? Vielleicht haben wir deutsche Vorfahren.

    --

    =========================================================================

    Geoff Crawford Phone: (973) 361 - 4224

    Innov8 Computer Software, LLC FAX: (973) 537 - 6946

    75 Fleetwood Drive, Suite 200 Email: geoff@innov8cs.com

    Rockaway NJ 07886 Web: http://www.innov8cs.com

    ProcessWare Financials - You don't have to reinvent the Accounting wheel

    The only Progress based GL/AR/AP made just for ISV's and Consultants

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Hi,

    I just checked in a fix for this and it can now be downloaded.

    You can only download a new version of ry/uib/rydyntreew.w and compile that

    and your problem should go away.

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people who

    are trying to understand the question.

    -Original Message-

    From: Marc Braun

    Sent: 20 August 2002 01:50

    To: 'dev@icf.possenet.org'

    Subject: AW: Error running repository maintenance tool

    Hi Mike!

    Thanks from the Swabians too;-) (probably nobody 'on the other side' will

    know

    what this means). We were running into this about two weeks ago and decided

    to go with V1.1 until 2.0 Beta is ready which is now obsolete (I hope).

    regards,

    Marc

    -Ursprüngliche Nachricht-

    Von: Anthony Swindells

    Gesendet: Dienstag, 20. August 2002 14:44

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Thanks a lot Mike for persevering with this one - we will get it fixed ASAP.

    Regards

    Anthony

    Anthony D Swindells

    Lead Architect, Progress Dynamics

    Progress Software Corporation

    aswindel@progress.com

    -Original Message-

    From: Mike Fechner

    Sent: Tuesday, August 20, 2002 7:52 AM

    To: dev@icf.possenet.org

    Subject: AW: Error running repository maintenance tool

    Hi,

    I did a new checkout of module posseall with the default branch and a

    complete compile using PBUILD.

    I am using the default icfconfig.xml file of this version. I am starting

    using the ICFDef sessiontype without AppServer connection.

    I found the European numeric-format as the cause of this error. If I

    change the numeric-format before starting the repository maintenance

    tools using session:numeric-format = "American" in a procedure editor I

    am able to run the tool! Setting the value back to "European" prevents

    the tool from being started again. I will log an issue.

    I use the European numeric format as a setting in my startup.pf file as

    I guess many Europoean customers are doing.

    Thanks for any hint's about session setting.

    Mike

    -Ursprüngliche Nachricht-

    Von: Mark Davies

    Gesendet: Dienstag, 20. August 2002 12:53

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Hi Mike,

    That is what we are running on too and the problem is not seen with the

    latest download as of this morning.

    The only thing I can think of is to maybe do a complete new download of

    POSSE MAIN and a fresh PBUILD.

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people

    who are trying to understand the question.

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 10:44

    To: dev@icf.possenet.org

    Cc: marksd@mip.co.za

    Subject: AW: Error running repository maintenance tool

    Hi Mark,

    I am using 9.1D.

    This is what Help - About returns:

    PROGRESS AppBuilder

    Version 9.1D

    PROGRESS Version 9.1D as of Wed May 8 17:24:00 EDT 2002

    Mike

    -Ursprüngliche Nachricht-

    Von: Mark Davies

    Gesendet: Dienstag, 20. August 2002 11:26

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Hi Mike,

    What version of Progress are you running?

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people

    who are trying to understand the question.

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 09:18

    To: dev@icf.possenet.org

    Subject: Error running repository maintenance tool

    Hi,

    I downloaded the latest version of dynamics 2 using a complete checkout

    in WinCVS yesterday morning and did a complete compile using the PBUILD

    utility. I created a new repository database using the

    src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the

    file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the

    src/icf/db/icg/dump directory.

    I have no problem running most of the dynamics tools (including new

    tools like the container builder).

    Only (?) the repository maintenace tool does not work at all. When I run

    it from the appbuilder menu (build) I get the nasty "OK to quit

    AppBuilder?" message. When I run it from the dynamic launcher the

    waiting clock is shown for a while but nothing else.

    As this ended up with no success I loaded all (819) .ado files.

    Am I missing anything? ADO or sourcecode? Or is this a known bug? Any

    help appreciated.

    Best regards,

    Mike

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Hi Mark,

    I was able to verify your fix.

    Thanks for the fast help!

    Mike

    -Ursprüngliche Nachricht-

    Von: Mark Davies

    Gesendet: Dienstag, 20. August 2002 17:04

    An: dev@icf.possenet.org

    Cc: ICF Core

    Betreff: RE: Error running repository maintenance tool

    Hi,

    I just checked in a fix for this and it can now be downloaded.

    You can only download a new version of ry/uib/rydyntreew.w and compile

    that and your problem should go away.

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people

    who are trying to understand the question.

    -Original Message-

    From: Marc Braun

    Sent: 20 August 2002 01:50

    To: 'dev@icf.possenet.org'

    Subject: AW: Error running repository maintenance tool

    Hi Mike!

    Thanks from the Swabians too;-) (probably nobody 'on the other side'

    will know what this means). We were running into this about two weeks

    ago and decided to go with V1.1 until 2.0 Beta is ready which is now

    obsolete (I hope).

    regards,

    Marc

    -Ursprüngliche Nachricht-

    Von: Anthony Swindells

    Gesendet: Dienstag, 20. August 2002 14:44

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Thanks a lot Mike for persevering with this one - we will get it fixed

    ASAP.

    Regards

    Anthony

    Anthony D Swindells

    Lead Architect, Progress Dynamics

    Progress Software Corporation

    aswindel@progress.com

    -Original Message-

    From: Mike Fechner

    Sent: Tuesday, August 20, 2002 7:52 AM

    To: dev@icf.possenet.org

    Subject: AW: Error running repository maintenance tool

    Hi,

    I did a new checkout of module posseall with the default branch and a

    complete compile using PBUILD.

    I am using the default icfconfig.xml file of this version. I am starting

    using the ICFDef sessiontype without AppServer connection.

    I found the European numeric-format as the cause of this error. If I

    change the numeric-format before starting the repository maintenance

    tools using session:numeric-format = "American" in a procedure editor I

    am able to run the tool! Setting the value back to "European" prevents

    the tool from being started again. I will log an issue.

    I use the European numeric format as a setting in my startup.pf file as

    I guess many Europoean customers are doing.

    Thanks for any hint's about session setting.

    Mike

    -Ursprüngliche Nachricht-

    Von: Mark Davies

    Gesendet: Dienstag, 20. August 2002 12:53

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Hi Mike,

    That is what we are running on too and the problem is not seen with the

    latest download as of this morning.

    The only thing I can think of is to maybe do a complete new download of

    POSSE MAIN and a fresh PBUILD.

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people

    who are trying to understand the question.

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 10:44

    To: dev@icf.possenet.org

    Cc: marksd@mip.co.za

    Subject: AW: Error running repository maintenance tool

    Hi Mark,

    I am using 9.1D.

    This is what Help - About returns:

    PROGRESS AppBuilder

    Version 9.1D

    PROGRESS Version 9.1D as of Wed May 8 17:24:00 EDT 2002

    Mike

    -Ursprüngliche Nachricht-

    Von: Mark Davies

    Gesendet: Dienstag, 20. August 2002 11:26

    An: dev@icf.possenet.org

    Betreff: RE: Error running repository maintenance tool

    Hi Mike,

    What version of Progress are you running?

    Regards,

    Mark Davies

    Senior Analyst Programmer

    MIP

    Tel: +27 (0)11 803 1281

    Fax: +27 (0)11 807 1732

    E-Mail: markd@mip.co.za

    PO Box 2899, Rivonia, 2128

    Johannesburg, South Africa

    Avoid people who say they know the answer. Keep the company of people

    who are trying to understand the question.

    -Original Message-

    From: Mike Fechner

    Sent: 20 August 2002 09:18

    To: dev@icf.possenet.org

    Subject: Error running repository maintenance tool

    Hi,

    I downloaded the latest version of dynamics 2 using a complete checkout

    in WinCVS yesterday morning and did a complete compile using the PBUILD

    utility. I created a new repository database using the

    src/icf/db/icf/dfd/icfdbfull.df and loaded the sequence values using the

    file src/icf/db/icf/dump/_icfdb_seqvals and loaded all .d files from the

    src/icf/db/icg/dump directory.

    I have no problem running most of the dynamics tools (including new

    tools like the container builder).

    Only (?) the repository maintenace tool does not work at all. When I run

    it from the appbuilder menu (build) I get the nasty "OK to quit

    AppBuilder?" message. When I run it from the dynamic launcher the

    waiting clock is shown for a while but nothing else.

    As this ended up with no success I loaded all (819) .ado files.

    Am I missing anything? ADO or sourcecode? Or is this a known bug? Any

    help appreciated.

    Best regards,

    Mike

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org