[icf-dev] Dynamics SP3 - Forum - OpenEdge Development - Progress Community
 Forum

[icf-dev] Dynamics SP3

  • Hi,

    I've just installed Dynamics SP3 following instructions as detailed in the

    readme file.

    Just to check my app is workforme as it did in SP2, I recompiled an SDO and

    its Logic Procedure and launched a dynamic container that besides that SDO

    includes a dynamic toolbar, dynamic browser and dynamic viewer.

    I find now, that all standard dynamics error messages (defined using

    aferrortxt.i) coming from server-side IP (*TransValidate, triggers, etc.)

    show up to the client interface in the raw form of, for example: "?^message

    text^writepretransvalidate module/sdologcp.p:pretransactionvalidate

    module/sdofullo.w^"

    Stack trace shows:

    icfstart.p (C:\Program Files\Progress Dynamics\gui\icf\icfstart.r) at line

    682

    initializeSession C:\Program Files\Progress

    Dynamics\gui\icf\af\app\afxmlcfgp.r (C:\Program Files\Progress

    Dynamics\gui\icf\af\app\afxmlcfgp.r) at line 1877

    startProcedure C:\Program Files\Progress Dynamics\gui\icf\af\app\afxmlcfgp.r

    (C:\Program Files\Progress Dynamics\gui\icf\af\app\afxmlcfgp.r) at line 2629

    C:\Program Files\Progress Dynamics\gui\_ab.r (C:\Program Files\Progress

    Dynamics\gui\_ab.r) at line 442

    adeuib/_uibmain.p (adeuib/_uibmain.r) at line 65535

    onChoose adm2/toolbar.p (C:\Program Files\Progress

    Dynamics\gui\adm2\toolbar.r) at line 4608

    updateRecord adm2/datavis.p (C:\Program Files\Progress

    Dynamics\gui\adm2\datavis.r) at line 3842

    submitRow adm2/data.p (C:\Program Files\Progress Dynamics\gui\adm2\data.r)

    at line 12678

    submitCommit adm2/data.p (C:\Program Files\Progress

    Dynamics\gui\adm2\data.r) at line 7751

    commitTransaction adm2/data.p (C:\Program Files\Progress

    Dynamics\gui\adm2\data.r) at line 3323

    --> showDataMessages adm2/datavis.p (C:\Program Files\Progress

    Dynamics\gui\adm2\datavis.r) at line 6129

    Error messages coming from client-side IP (RowObjectValidate,

    columnValidate, etc.) just show up fine.

    I'm on a W2K Advanced Server SP2, 9.1C19, using a ICFDev session.

    Any suggestions appreciated.

    TIA,

    Ariel.-

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Ariel,

    We have this issues as well with all error messages coming from the SDO

    transaction validation procedures.

    There is an issue logged for it already (4331). As far as I can see it

    will be fixed in V2 or after the V2 beta has been released - not sure if

    it will be fixed for 1.1.

    Regards

    Thomas Hansen

    Managing Director

    ___________________________________

    MIP Europe A/S

    Ã…strupvej 53

    9800 Hjørring

    Denmark

    Tel.: +45 98 90 49 16

    Fax.: +45 98 90 49 17

    Mobile : +45 20 16 19 29

    E-mail : thomas@mip-europe.com

    Web : www.mip-europe.com

    Chairman - Danish Progress User Group

    __________________________________

    Dynamics-Based Astra2, AstraGen2 Global Application and AstraFin2

    Financial Modules

        • Advanced Future Proof RAD Progress Enterprise Development ****

    -Original Message-

    From: Ariel Sorbello

    Sent: 11. august 2002 00:06

    To: ICF Dev

    Subject: Dynamics SP3

    Hi,

    I've just installed Dynamics SP3 following instructions as detailed in

    the readme file. Just to check my app is workforme as it did in SP2, I

    recompiled an SDO and its Logic Procedure and launched a dynamic

    container that besides that SDO includes a dynamic toolbar, dynamic

    browser and dynamic viewer. I find now, that all standard dynamics error

    messages (defined using

    aferrortxt.i) coming from server-side IP (*TransValidate, triggers,

    etc.) show up to the client interface in the raw form of, for example:

    "?message textwritepretransvalidate

    module/sdologcp.p:pretransactionvalidate

    module/sdofullo.w^"

    Stack trace shows:

    icfstart.p (C:\Program Files\Progress Dynamics\gui\icf\icfstart.r) at

    line 682 initializeSession C:\Program Files\Progress

    Dynamics\gui\icf\af\app\afxmlcfgp.r (C:\Program Files\Progress

    Dynamics\gui\icf\af\app\afxmlcfgp.r) at line 1877 startProcedure

    C:\Program Files\Progress Dynamics\gui\icf\af\app\afxmlcfgp.r

    (C:\Program Files\Progress Dynamics\gui\icf\af\app\afxmlcfgp.r) at line

    2629 C:\Program Files\Progress Dynamics\gui\_ab.r (C:\Program

    Files\Progress

    Dynamics\gui\_ab.r) at line 442

    adeuib/_uibmain.p (adeuib/_uibmain.r) at line 65535

    onChoose adm2/toolbar.p (C:\Program Files\Progress

    Dynamics\gui\adm2\toolbar.r) at line 4608

    updateRecord adm2/datavis.p (C:\Program Files\Progress

    Dynamics\gui\adm2\datavis.r) at line 3842

    submitRow adm2/data.p (C:\Program Files\Progress

    Dynamics\gui\adm2\data.r) at line 12678 submitCommit adm2/data.p

    (C:\Program Files\Progress

    Dynamics\gui\adm2\data.r) at line 7751

    commitTransaction adm2/data.p (C:\Program Files\Progress

    Dynamics\gui\adm2\data.r) at line 3323

    --showDataMessages adm2/datavis.p (C:\Program Files\Progress

    Dynamics\gui\adm2\datavis.r) at line 6129

    Error messages coming from client-side IP (RowObjectValidate,

    columnValidate, etc.) just show up fine.

    I'm on a W2K Advanced Server SP2, 9.1C19, using a ICFDev session.

    Any suggestions appreciated.

    TIA,

    Ariel.-

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Thomas,

    Thanks for feedback.

    Are you aware if migration to V2 will be possible from a SP2 development, or

    should that be SP3?

    Regards,

    Ariel.

    -Original Message-

    From: Thomas Hansen

    Sent: Sunday, August 11, 2002 5:14 AM

    To: dev@icf.possenet.org

    Subject: RE: Dynamics SP3

    Ariel,

    We have this issues as well with all error messages coming from the SDO

    transaction validation procedures.

    There is an issue logged for it already (4331). As far as I can see it

    will be fixed in V2 or after the V2 beta has been released - not sure if

    it will be fixed for 1.1.

    Regards

    Thomas Hansen

    Managing Director

    ___________________________________

    MIP Europe A/S

    Ã…strupvej 53

    9800 Hjørring

    Denmark

    Tel.: +45 98 90 49 16

    Fax.: +45 98 90 49 17

    Mobile : +45 20 16 19 29

    E-mail : thomas@mip-europe.com

    Web : www.mip-europe.com

    Chairman - Danish Progress User Group

    __________________________________

    Dynamics-Based Astra2, AstraGen2 Global Application and AstraFin2

    Financial Modules

        • Advanced Future Proof RAD Progress Enterprise Development ****

    -Original Message-

    From: Ariel Sorbello

    Sent: 11. august 2002 00:06

    To: ICF Dev

    Subject: Dynamics SP3

    Hi,

    I've just installed Dynamics SP3 following instructions as detailed in

    the readme file. Just to check my app is workforme as it did in SP2, I

    recompiled an SDO and its Logic Procedure and launched a dynamic

    container that besides that SDO includes a dynamic toolbar, dynamic

    browser and dynamic viewer. I find now, that all standard dynamics error

    messages (defined using

    aferrortxt.i) coming from server-side IP (*TransValidate, triggers,

    etc.) show up to the client interface in the raw form of, for example:

    "?message textwritepretransvalidate

    module/sdologcp.p:pretransactionvalidate

    module/sdofullo.w^"

    Stack trace shows:

    icfstart.p (C:\Program Files\Progress Dynamics\gui\icf\icfstart.r) at

    line 682 initializeSession C:\Program Files\Progress

    Dynamics\gui\icf\af\app\afxmlcfgp.r (C:\Program Files\Progress

    Dynamics\gui\icf\af\app\afxmlcfgp.r) at line 1877 startProcedure

    C:\Program Files\Progress Dynamics\gui\icf\af\app\afxmlcfgp.r

    (C:\Program Files\Progress Dynamics\gui\icf\af\app\afxmlcfgp.r) at line

    2629 C:\Program Files\Progress Dynamics\gui\_ab.r (C:\Program

    Files\Progress

    Dynamics\gui\_ab.r) at line 442

    adeuib/_uibmain.p (adeuib/_uibmain.r) at line 65535

    onChoose adm2/toolbar.p (C:\Program Files\Progress

    Dynamics\gui\adm2\toolbar.r) at line 4608

    updateRecord adm2/datavis.p (C:\Program Files\Progress

    Dynamics\gui\adm2\datavis.r) at line 3842

    submitRow adm2/data.p (C:\Program Files\Progress

    Dynamics\gui\adm2\data.r) at line 12678 submitCommit adm2/data.p

    (C:\Program Files\Progress

    Dynamics\gui\adm2\data.r) at line 7751

    commitTransaction adm2/data.p (C:\Program Files\Progress

    Dynamics\gui\adm2\data.r) at line 3323

    --showDataMessages adm2/datavis.p (C:\Program Files\Progress

    Dynamics\gui\adm2\datavis.r) at line 6129

    Error messages coming from client-side IP (RowObjectValidate,

    columnValidate, etc.) just show up fine.

    I'm on a W2K Advanced Server SP2, 9.1C19, using a ICFDev session.

    Any suggestions appreciated.

    TIA,

    Ariel.-

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Hi,

    Have Dynamics SP3.

    Has anybody had problems with Range Security.

    Situation.

    Have built the demo and this works fine with an example of Range Security

    for Countries.

    However if I define an additional range record for say "Carries" against

    Orders and us the same code structure in the InitializeObject code in

    Orderlogcp.p (Changed Input Vales to 'Carriers' and 'orderfullo' etc) the

    data returned is always the Countries data values????

    Hope this makes sense.

    Regards

    Peter

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • upgrades will only be supported from at least SP3 to V2.

    Anthony

    Anthony D Swindells

    Lead Architect, Progress Dynamics

    Progress Software Corporation

    aswindel@progress.com

    -Original Message-

    From: Ariel Sorbello

    Sent: Sunday, August 11, 2002 8:55 PM

    To: dev@icf.possenet.org

    Subject: RE: Dynamics SP3

    Thomas,

    Thanks for feedback.

    Are you aware if migration to V2 will be possible from a SP2 development, or

    should that be SP3?

    Regards,

    Ariel.

    -Original Message-

    From: Thomas Hansen

    Sent: Sunday, August 11, 2002 5:14 AM

    To: dev@icf.possenet.org

    Subject: RE: Dynamics SP3

    Ariel,

    We have this issues as well with all error messages coming from the SDO

    transaction validation procedures.

    There is an issue logged for it already (4331). As far as I can see it

    will be fixed in V2 or after the V2 beta has been released - not sure if

    it will be fixed for 1.1.

    Regards

    Thomas Hansen

    Managing Director

    ___________________________________

    MIP Europe A/S

    Ã…strupvej 53

    9800 Hjørring

    Denmark

    Tel.: +45 98 90 49 16

    Fax.: +45 98 90 49 17

    Mobile : +45 20 16 19 29

    E-mail : thomas@mip-europe.com

    Web : www.mip-europe.com

    Chairman - Danish Progress User Group

    __________________________________

    Dynamics-Based Astra2, AstraGen2 Global Application and AstraFin2

    Financial Modules

        • Advanced Future Proof RAD Progress Enterprise Development ****

    -Original Message-

    From: Ariel Sorbello

    Sent: 11. august 2002 00:06

    To: ICF Dev

    Subject: Dynamics SP3

    Hi,

    I've just installed Dynamics SP3 following instructions as detailed in

    the readme file. Just to check my app is workforme as it did in SP2, I

    recompiled an SDO and its Logic Procedure and launched a dynamic

    container that besides that SDO includes a dynamic toolbar, dynamic

    browser and dynamic viewer. I find now, that all standard dynamics error

    messages (defined using

    aferrortxt.i) coming from server-side IP (*TransValidate, triggers,

    etc.) show up to the client interface in the raw form of, for example:

    "?message textwritepretransvalidate

    module/sdologcp.p:pretransactionvalidate

    module/sdofullo.w^"

    Stack trace shows:

    icfstart.p (C:\Program Files\Progress Dynamics\gui\icf\icfstart.r) at

    line 682 initializeSession C:\Program Files\Progress

    Dynamics\gui\icf\af\app\afxmlcfgp.r (C:\Program Files\Progress

    Dynamics\gui\icf\af\app\afxmlcfgp.r) at line 1877 startProcedure

    C:\Program Files\Progress Dynamics\gui\icf\af\app\afxmlcfgp.r

    (C:\Program Files\Progress Dynamics\gui\icf\af\app\afxmlcfgp.r) at line

    2629 C:\Program Files\Progress Dynamics\gui\_ab.r (C:\Program

    Files\Progress

    Dynamics\gui\_ab.r) at line 442

    adeuib/_uibmain.p (adeuib/_uibmain.r) at line 65535

    onChoose adm2/toolbar.p (C:\Program Files\Progress

    Dynamics\gui\adm2\toolbar.r) at line 4608

    updateRecord adm2/datavis.p (C:\Program Files\Progress

    Dynamics\gui\adm2\datavis.r) at line 3842

    submitRow adm2/data.p (C:\Program Files\Progress

    Dynamics\gui\adm2\data.r) at line 12678 submitCommit adm2/data.p

    (C:\Program Files\Progress

    Dynamics\gui\adm2\data.r) at line 7751

    commitTransaction adm2/data.p (C:\Program Files\Progress

    Dynamics\gui\adm2\data.r) at line 3323

    --showDataMessages adm2/datavis.p (C:\Program Files\Progress

    Dynamics\gui\adm2\datavis.r) at line 6129

    Error messages coming from client-side IP (RowObjectValidate,

    columnValidate, etc.) just show up fine.

    I'm on a W2K Advanced Server SP2, 9.1C19, using a ICFDev session.

    Any suggestions appreciated.

    TIA,

    Ariel.-

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • When I run the same application (upgrated from SP2 to SP3) against AppServer

    in Linux (9.1C10) I'm seeing error "BUFFER-FIELD HasDynamicProxy was not

    found in buffer ADMProps (7351)" when any dynamic container is launched. The

    container comes finally up, and everything seems to works fine.

    After upgrading repository I recompiled static objects and updated all

    necessary dynamics installation files on the linux environment. Appserver

    settings, environment settings and such are the same as those I had

    configured for SP2 repository.

    Is there anything else I should do to avoid this error?

    TIA,

    Ariel.-

    -Original Message-

    From: Anthony Swindells

    Sent: Monday, August 12, 2002 2:25 PM

    To: dev@icf.possenet.org

    Subject: RE: Dynamics SP3

    upgrades will only be supported from at least SP3 to V2.

    Anthony

    Anthony D Swindells

    Lead Architect, Progress Dynamics

    Progress Software Corporation

    aswindel@progress.com

    -Original Message-

    From: Ariel Sorbello

    Sent: Sunday, August 11, 2002 8:55 PM

    To: dev@icf.possenet.org

    Subject: RE: Dynamics SP3

    Thomas,

    Thanks for feedback.

    Are you aware if migration to V2 will be possible from a SP2 development, or

    should that be SP3?

    Regards,

    Ariel.

    -Original Message-

    From: Thomas Hansen

    Sent: Sunday, August 11, 2002 5:14 AM

    To: dev@icf.possenet.org

    Subject: RE: Dynamics SP3

    Ariel,

    We have this issues as well with all error messages coming from the SDO

    transaction validation procedures.

    There is an issue logged for it already (4331). As far as I can see it

    will be fixed in V2 or after the V2 beta has been released - not sure if

    it will be fixed for 1.1.

    Regards

    Thomas Hansen

    Managing Director

    ___________________________________

    MIP Europe A/S

    Ã…strupvej 53

    9800 Hjørring

    Denmark

    Tel.: +45 98 90 49 16

    Fax.: +45 98 90 49 17

    Mobile : +45 20 16 19 29

    E-mail : thomas@mip-europe.com

    Web : www.mip-europe.com

    Chairman - Danish Progress User Group

    __________________________________

    Dynamics-Based Astra2, AstraGen2 Global Application and AstraFin2

    Financial Modules

        • Advanced Future Proof RAD Progress Enterprise Development ****

    -Original Message-

    From: Ariel Sorbello

    Sent: 11. august 2002 00:06

    To: ICF Dev

    Subject: Dynamics SP3

    Hi,

    I've just installed Dynamics SP3 following instructions as detailed in

    the readme file. Just to check my app is workforme as it did in SP2, I

    recompiled an SDO and its Logic Procedure and launched a dynamic

    container that besides that SDO includes a dynamic toolbar, dynamic

    browser and dynamic viewer. I find now, that all standard dynamics error

    messages (defined using

    aferrortxt.i) coming from server-side IP (*TransValidate, triggers,

    etc.) show up to the client interface in the raw form of, for example:

    "?message textwritepretransvalidate

    module/sdologcp.p:pretransactionvalidate

    module/sdofullo.w^"

    Stack trace shows:

    icfstart.p (C:\Program Files\Progress Dynamics\gui\icf\icfstart.r) at

    line 682 initializeSession C:\Program Files\Progress

    Dynamics\gui\icf\af\app\afxmlcfgp.r (C:\Program Files\Progress

    Dynamics\gui\icf\af\app\afxmlcfgp.r) at line 1877 startProcedure

    C:\Program Files\Progress Dynamics\gui\icf\af\app\afxmlcfgp.r

    (C:\Program Files\Progress Dynamics\gui\icf\af\app\afxmlcfgp.r) at line

    2629 C:\Program Files\Progress Dynamics\gui\_ab.r (C:\Program

    Files\Progress

    Dynamics\gui\_ab.r) at line 442

    adeuib/_uibmain.p (adeuib/_uibmain.r) at line 65535

    onChoose adm2/toolbar.p (C:\Program Files\Progress

    Dynamics\gui\adm2\toolbar.r) at line 4608

    updateRecord adm2/datavis.p (C:\Program Files\Progress

    Dynamics\gui\adm2\datavis.r) at line 3842

    submitRow adm2/data.p (C:\Program Files\Progress

    Dynamics\gui\adm2\data.r) at line 12678 submitCommit adm2/data.p

    (C:\Program Files\Progress

    Dynamics\gui\adm2\data.r) at line 7751

    commitTransaction adm2/data.p (C:\Program Files\Progress

    Dynamics\gui\adm2\data.r) at line 3323

    --showDataMessages adm2/datavis.p (C:\Program Files\Progress

    Dynamics\gui\adm2\datavis.r) at line 6129

    Error messages coming from client-side IP (RowObjectValidate,

    columnValidate, etc.) just show up fine.

    I'm on a W2K Advanced Server SP2, 9.1C19, using a ICFDev session.

    Any suggestions appreciated.

    TIA,

    Ariel.-

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org