10.2B08 & 11.5 dual install , remote monitoring - Forum - OpenEdge Deployment - Progress Community

10.2B08 & 11.5 dual install , remote monitoring

 Forum

10.2B08 & 11.5 dual install , remote monitoring

This question is answered

It is possible to have both versions of OE on same machine (managed by OEM)?

I have 10.2B/win32 on my local dev server. I have installed 11.5 on same server and have changed adminport and port to new values (This is my test to move from 10.2B to 11.5). Everything works fine.

To emulate of coexistence these two versions I should enable remote monitoring by remote OE Management server. No issues with 10.2B, but some questions with v11:

I have installed OEM 11.5 on remote AIX server and made all configuration tasks (initial setup, changed port value (from default 6835 to 6836) in [Management] section of management.properties on both AIX and win32 servers, restart).

And I cannot discover my server from OEM. It is possible? (After all,both versions have different types of jms transport)

Best Regards,

Dmitry.

Verified Answer
  • I am sorry )

    This was a windows firewall problem (on my test client). Everything works fine.

All Replies
  • You can’t remotely monitor 10.2B from 11.5
     
    11.5 can remotely monitor 11.3/4/5.
     
    From: Dmitry Lishafaev [mailto:bounce-dmilis@community.progress.com]
    Sent: Friday, March 13, 2015 1:15 PM
    To: TU.OE.Deployment@community.progress.com
    Subject: [Technical Users - OE Deployment] 10.2B08 & 11.5 dual install , remote monitoring
     
    Thread created by Dmitry Lishafaev

    It is possible to have both versions of OE on same machine (managed by OEM)?

    I have 10.2B/win32 on my local dev server. I have installed 11.5 on same server and have changed adminport and port to new values (This is my test to move from 10.2B to 11.5). Everything works fine.

    To emulate of coexistence these two versions I should enable remote monitoring by remote OE Management server. No issues with 10.2B, but some questions with v11:

    I have installed OEM 11.5 on remote AIX server and made all configuration tasks (initial setup, changed port value (from default 6835 to 6836) in [Management] section of management.properties on both AIX and win32 servers, restart).

    And I cannot discover my server from OEM. It is possible? (After all,both versions have different types of jms transport)

    Best Regards,

    Dmitry.

    Stop receiving emails on this subject.

    Flag this post as spam/abuse.

  • Unless I misread and you have both 10.2B and 11.5 on both Win and AIX machines.
     
    11.5 OEM should be able to see 11.5 on Windows.
     
    What happens if you add the Windows 11.5 instance under Options – remote monitoring to be monitored ?
     
    From: Libor Laubacher [mailto:bounce-llaubach@community.progress.com]
    Sent: Friday, March 13, 2015 1:17 PM
    To: TU.OE.Deployment@community.progress.com
    Subject: RE: [Technical Users - OE Deployment] 10.2B08 & 11.5 dual install , remote monitoring
     
    Reply by Libor Laubacher
    You can’t remotely monitor 10.2B from 11.5
     
    11.5 can remotely monitor 11.3/4/5.
     
    From: Dmitry Lishafaev [mailto:bounce-dmilis@community.progress.com]
    Sent: Friday, March 13, 2015 1:15 PM
    To: TU.OE.Deployment@community.progress.com
    Subject: [Technical Users - OE Deployment] 10.2B08 & 11.5 dual install , remote monitoring
     
    Thread created by Dmitry Lishafaev

    It is possible to have both versions of OE on same machine (managed by OEM)?

    I have 10.2B/win32 on my local dev server. I have installed 11.5 on same server and have changed adminport and port to new values (This is my test to move from 10.2B to 11.5). Everything works fine.

    To emulate of coexistence these two versions I should enable remote monitoring by remote OE Management server. No issues with 10.2B, but some questions with v11:

    I have installed OEM 11.5 on remote AIX server and made all configuration tasks (initial setup, changed port value (from default 6835 to 6836) in [Management] section of management.properties on both AIX and win32 servers, restart).

    And I cannot discover my server from OEM. It is possible? (After all,both versions have different types of jms transport)

    Best Regards,

    Dmitry.

    Stop receiving emails on this subject.

    Flag this post as spam/abuse.

    Stop receiving emails on this subject.

    Flag this post as spam/abuse.

  • I have OEM 10.2B and OEM 11.5 on two separated AIX-boxes.

    And I have one win32 server with 10.2 and 11.5 dual install.

    No issues with 10.2B remote monitoring  on OEM10.2B.

    I cannot discover 11.5 adminserver on OEM 11.5.

    I can discover 11.5/win32 on clean PC, but my goal is to have BOTH versions on same server managed by corresponded OE version.

  • Ø  I cannot discover 11.5 adminserver on OEM 11.5.

    Can you add it manually ?
     
    From: Dmitry Lishafaev [mailto:bounce-dmilis@community.progress.com]
    Sent: Friday, March 13, 2015 1:30 PM
    To: TU.OE.Deployment@community.progress.com
    Subject: RE: [Technical Users - OE Deployment] 10.2B08 & 11.5 dual install , remote monitoring
     
    Reply by Dmitry Lishafaev

    I have OEM 10.2B and OEM 11.5 on two separated AIX-boxes.

    And I have one win32 server with 10.2 and 11.5 dual install.

    No issues with 10.2B remote monitoring  on OEM10.2B.

    I cannot discover 11.5 adminserver on OEM 11.5.

    I can discover 11.5/win32 on clean PC, but my goal is to have BOTH versions on same server managed by corresponded OE version.

    Stop receiving emails on this subject.

    Flag this post as spam/abuse.

  • How I can add it manually (without GUI)? There is no fmconfig in my 11.5.

  • OEM Console – options – remote adminservers – add (or new or something like that)
     
    The remote monitoring ‘listener’ is enabled automatically since 11.3.
     
    From: Dmitry Lishafaev [mailto:bounce-dmilis@community.progress.com]
    Sent: Friday, March 13, 2015 1:45 PM
    To: TU.OE.Deployment@community.progress.com
    Subject: RE: [Technical Users - OE Deployment] 10.2B08 & 11.5 dual install , remote monitoring
     
    Reply by Dmitry Lishafaev

    How I can add it manually (without GUI)? There is no fmconfig in my 11.5.

    Stop receiving emails on this subject.

    Flag this post as spam/abuse.

  • For adding remote container you can go to remote admitserver configuration page.

    OEM --> Options --> RemoteAdminServerConfiguration --> New

    Note :  You can add remote container or adminserver of 11.3 and above to 11.3 and above OEM.

    11.3 remote container can not added to OEM prior to 11.3 release.

  • Since 11.3 fmconfig no more required to enable remote monitoring.

    As Libor said, You can simply add remote adminserver to OEM (OEM --> Options --> RemoteAdminServerConfiguration --> New )

    Make sure you give the right activeMQ server port while adding the server.

    Thanks,
     
    From: Dmitry Lishafaev [mailto:bounce-dmilis@community.progress.com]
    Sent: Friday, March 13, 2015 6:15 PM
    To: TU.OE.Deployment@community.progress.com
    Subject: RE: [Technical Users - OE Deployment] 10.2B08 & 11.5 dual install , remote monitoring
     
    Reply by Dmitry Lishafaev

    How I can add it manually (without GUI)? There is no fmconfig in my 11.5.

    Stop receiving emails on this subject.

    Flag this post as spam/abuse.

  • I am sorry )

    This was a windows firewall problem (on my test client). Everything works fine.