• There is nothing built-in out of the box for them. However, you can create custom monitors as need be. I was able to locate the SNMP MIBs for their devices here: https://assets.tripplite.com/firmware/tripplite-mib.zip

     

    Using that, I loaded them into a MIB browser and found the following which you might find useful:

    •  tlUpsBatteryAge 1.3.6.1.4.1.850.100.1.2.1 The age of the battery in years. This is equal to the current date minus tlConfigBattReplDate
    •  tlUpsTemperatureF 1.3.6.1.4.1.850.100.1.2.2 The temperature of the battery, in Farenheight degrees. This is calculated from upsBatteryTemperature, which is in Celsius degrees.
    •  tlUpsExternalBatteryAge 1.3.6.1.4.1.850.100.1.2.3 The age of external battery in years. This is equal to the current date minus tlConfigExternalBattReplDate.
    •  tlUpsOutputPowerTotal 1.3.6.1.4.1.850.100.1.4.5 The power capacity of the device.
    •  tlUpsAlarmsPresent 1.3.6.1.4.1.850.100.1.6.1 The present number of active alarm conditions.
    •   tlUpsOutletNumOutlets 1.3.6.1.4.1.850.100.1.10.1 The number of available Outlets in this device.
    •  tlUpsTemperature 1.3.6.1.4.1.850.100.1.13.1 The ambient temperature. The measurement returned will either be in units of Celsius (C) or Fahrenheit (F) depending upon whether Metric or English was selected for the reading by tlUpsConfigDisplayUnits.

     

    There are many, many more counters as it appears Tripp Lite has great SNMP support. In any case, keep in mind WhatsUp Gold can collect any SNMP value by creating a new monitor. Settings > Libraries > Monitors and then select +. SNMP monitors can be either active or performance, and SNMP traps can be listened for as well using passive monitors.

     

    Edit: it looks like they also support the industry standard SNMP MIB: UPS-MIB @ OID  1.3.6.1.2.1.33