[icf-dev] Roundtable - Logic Procedures - Forum - OpenEdge Development - Progress Community

[icf-dev] Roundtable - Logic Procedures

 Forum

[icf-dev] Roundtable - Logic Procedures

  • Within Roundtable (Dynamics 1.1A SP3), logic procedures (subtype DLProc)

    have 2 parts; '.p' and '_cl.p'.

    Since logic procedures are stored as entries in ryc_smartobject, should

    Roundtable be storing an additional part for an '.ado' file? This would be

    in keeping with the way other objects (eg. SDO, procedure) are stored.

    Also, we upgraded from SP2 to SP3, and have much of the adm2 missing from

    our Roundtable repository. We have been told (by Progress) that this is due

    to a known issue with the SP2 to SP3 incremental upgrade, and will be

    resolved by a future re-release of this service pack. Can anyone tell me

    when this will be available?

    TIA

    John Lindley

    Videss Ltd.

    ******************************************************************

    This email/fax and any attachments may be confidential.

    If you are not the named recipient then please notify the sender

    immediately.

    You should not disclose the contents to another person, use, copy

    or store the information in any form.

    Videss Ltd.

    633 Halifax Road

    Liversedge

    West Yorkshire

    WF15 8HG

    http://www.videss.co.uk

    Registered in England

    No. 1342626

    ******************************************************************

    ________________________________________________________________________

    This email has been scanned for all viruses by the MessageLabs SkyScan

    service. For more information on a proactive anti-virus service working

    around the clock, around the globe, visit http://www.messagelabs.com

    ________________________________________________________________________

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • The re-release of SP3 is expected to be released by the end of next week.

    Frank Kjaersgaard

    Product Manager

    -Original Message-

    From: John Lindley

    Sent: Tuesday, July 30, 2002 12:34 PM

    To: 'dev@icf.possenet.org'

    Subject: Roundtable - Logic Procedures

    Within Roundtable (Dynamics 1.1A SP3), logic procedures (subtype DLProc)

    have 2 parts; '.p' and '_cl.p'.

    Since logic procedures are stored as entries in ryc_smartobject, should

    Roundtable be storing an additional part for an '.ado' file? This would be

    in keeping with the way other objects (eg. SDO, procedure) are stored.

    Also, we upgraded from SP2 to SP3, and have much of the adm2 missing from

    our Roundtable repository. We have been told (by Progress) that this is due

    to a known issue with the SP2 to SP3 incremental upgrade, and will be

    resolved by a future re-release of this service pack. Can anyone tell me

    when this will be available?

    TIA

    John Lindley

    Videss Ltd.

    ******************************************************************

    This email/fax and any attachments may be confidential.

    If you are not the named recipient then please notify the sender

    immediately.

    You should not disclose the contents to another person, use, copy

    or store the information in any form.

    Videss Ltd.

    633 Halifax Road

    Liversedge

    West Yorkshire

    WF15 8HG

    http://www.videss.co.uk

    Registered in England

    No. 1342626

    ******************************************************************

    ________________________________________________________________________

    This email has been scanned for all viruses by the MessageLabs SkyScan

    service. For more information on a proactive anti-virus service working

    around the clock, around the globe, visit http://www.messagelabs.com

    ________________________________________________________________________

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Hi,

    Can anyone tell me how to get the af/bmp bitmaps from WinCVS. I have

    down-loaded posseall and icf (without any tags to get the latest code) but

    the af/bmp directory is empty. If I use the posse_20 tag then this

    directory is populated.

    Am I missing something or has this just not been populated? Are there any

    other directories that are similarly unpopulated?

    Thanks.

    Gary.

    Gary S Clink

    Consultant

    Phone: +44-(0)1753-216300

    Direct: +44-(0)1753-216308

    E-Mail: gary.clink@progress.com

    Progress Software (UK) URL: http://www.progress.com/

    **********************************************************************

    This e-mail is from Progress Software. Our web site is at

    http://www.progress.com Our principal place of business in the UK is at 210

    Bath Road, Slough, Berkshire, SL1 3XE, UK. Our central telephone number is

    +44 (0)1753 216300.

    This e-mail (including any attachments) is intended only for the

    recipient(s) named above. It may contain confidential or privileged

    information and should not be read, copied or otherwise used by any other

    person. If you are not a named recipient, please contact the sender and

    delete the e-mail from your system.

    **********************************************************************

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • They have moved to ry/img in the main branch. In posse_20 they are still in

    af/bmp. We did this on purpose in V2 to merge the images into one directory

    for sharing on the web.

    Ant

    Anthony D Swindells

    Lead Architect, Progress Dynamics

    Progress Software Corporation

    aswindel@progress.com

    -Original Message-

    From: Gary Clink

    Sent: Thursday, August 01, 2002 5:53 AM

    To: dev@icf.possenet.org

    Subject: Bitmaps in WinCVS

    Hi,

    Can anyone tell me how to get the af/bmp bitmaps from WinCVS. I have

    down-loaded posseall and icf (without any tags to get the latest code) but

    the af/bmp directory is empty. If I use the posse_20 tag then this

    directory is populated.

    Am I missing something or has this just not been populated? Are there any

    other directories that are similarly unpopulated?

    Thanks.

    Gary.

    Gary S Clink

    Consultant

    Phone: +44-(0)1753-216300

    Direct: +44-(0)1753-216308

    E-Mail: gary.clink@progress.com

    Progress Software (UK) URL: http://www.progress.com/

    **********************************************************************

    This e-mail is from Progress Software. Our web site is at

    http://www.progress.com Our principal place of business in the UK is at 210

    Bath Road, Slough, Berkshire, SL1 3XE, UK. Our central telephone number is

    +44 (0)1753 216300.

    This e-mail (including any attachments) is intended only for the

    recipient(s) named above. It may contain confidential or privileged

    information and should not be read, copied or otherwise used by any other

    person. If you are not a named recipient, please contact the sender and

    delete the e-mail from your system.

    **********************************************************************

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Hi,

    As per the e-mail below, the re-release of SP3 should be available by now

    ...

    The question is - it is re-released yet or not?

    Regards, Cheryl.

    -Original Message-

    From: Frank Kjaersgaard

    Sent: Wednesday, 31 July 2002 6:18

    To: dev@icf.possenet.org

    Subject: RE: Roundtable - Logic Procedures

    The re-release of SP3 is expected to be released by the end of next week.

    Frank Kjaersgaard

    Product Manager

    -Original Message-

    From: John Lindley

    Sent: Tuesday, July 30, 2002 12:34 PM

    To: 'dev@icf.possenet.org'

    Subject: Roundtable - Logic Procedures

    Within Roundtable (Dynamics 1.1A SP3), logic procedures (subtype DLProc)

    have 2 parts; '.p' and '_cl.p'.

    Since logic procedures are stored as entries in ryc_smartobject, should

    Roundtable be storing an additional part for an '.ado' file? This would be

    in keeping with the way other objects (eg. SDO, procedure) are stored.

    Also, we upgraded from SP2 to SP3, and have much of the adm2 missing from

    our Roundtable repository. We have been told (by Progress) that this is due

    to a known issue with the SP2 to SP3 incremental upgrade, and will be

    resolved by a future re-release of this service pack. Can anyone tell me

    when this will be available?

    TIA

    John Lindley

    Videss Ltd.

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • sorry but it is still in testing. Will let you know when it is ready, but

    will likely be another week or so.

    Anthony

    Anthony D Swindells

    Lead Architect, Progress Dynamics

    Progress Software Corporation

    aswindel@progress.com

    -Original Message-

    From: Cheryl Field

    Sent: Tuesday, August 13, 2002 8:10 PM

    To: dev@icf.possenet.org

    Subject: SP3 re-release?

    Hi,

    As per the e-mail below, the re-release of SP3 should be available by now

    ...

    The question is - it is re-released yet or not?

    Regards, Cheryl.

    -Original Message-

    From: Frank Kjaersgaard

    Sent: Wednesday, 31 July 2002 6:18

    To: dev@icf.possenet.org

    Subject: RE: Roundtable - Logic Procedures

    The re-release of SP3 is expected to be released by the end of next week.

    Frank Kjaersgaard

    Product Manager

    -Original Message-

    From: John Lindley

    Sent: Tuesday, July 30, 2002 12:34 PM

    To: 'dev@icf.possenet.org'

    Subject: Roundtable - Logic Procedures

    Within Roundtable (Dynamics 1.1A SP3), logic procedures (subtype DLProc)

    have 2 parts; '.p' and '_cl.p'.

    Since logic procedures are stored as entries in ryc_smartobject, should

    Roundtable be storing an additional part for an '.ado' file? This would be

    in keeping with the way other objects (eg. SDO, procedure) are stored.

    Also, we upgraded from SP2 to SP3, and have much of the adm2 missing from

    our Roundtable repository. We have been told (by Progress) that this is due

    to a known issue with the SP2 to SP3 incremental upgrade, and will be

    resolved by a future re-release of this service pack. Can anyone tell me

    when this will be available?

    TIA

    John Lindley

    Videss Ltd.

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Just to know... is SP3 re-release (SP3.01?) anywhere available for download?

    Thanks.

    -Original Message-

    From: Anthony Swindells

    Sent: Tuesday, August 13, 2002 9:58 PM

    To: dev@icf.possenet.org

    Subject: RE: SP3 re-release?

    sorry but it is still in testing. Will let you know when it is ready, but

    will likely be another week or so.

    Anthony

    Anthony D Swindells

    Lead Architect, Progress Dynamics

    Progress Software Corporation

    aswindel@progress.com

    -Original Message-

    From: Cheryl Field

    Sent: Tuesday, August 13, 2002 8:10 PM

    To: dev@icf.possenet.org

    Subject: SP3 re-release?

    Hi,

    As per the e-mail below, the re-release of SP3 should be available by now

    ...

    The question is - it is re-released yet or not?

    Regards, Cheryl.

    -Original Message-

    From: Frank Kjaersgaard

    Sent: Wednesday, 31 July 2002 6:18

    To: dev@icf.possenet.org

    Subject: RE: Roundtable - Logic Procedures

    The re-release of SP3 is expected to be released by the end of next week.

    Frank Kjaersgaard

    Product Manager

    -Original Message-

    From: John Lindley

    Sent: Tuesday, July 30, 2002 12:34 PM

    To: 'dev@icf.possenet.org'

    Subject: Roundtable - Logic Procedures

    Within Roundtable (Dynamics 1.1A SP3), logic procedures (subtype DLProc)

    have 2 parts; '.p' and '_cl.p'.

    Since logic procedures are stored as entries in ryc_smartobject, should

    Roundtable be storing an additional part for an '.ado' file? This would be

    in keeping with the way other objects (eg. SDO, procedure) are stored.

    Also, we upgraded from SP2 to SP3, and have much of the adm2 missing from

    our Roundtable repository. We have been told (by Progress) that this is due

    to a known issue with the SP2 to SP3 incremental upgrade, and will be

    resolved by a future re-release of this service pack. Can anyone tell me

    when this will be available?

    TIA

    John Lindley

    Videss Ltd.

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • You can find it at http://www.progress.com/patches/dynamics/index.htm in the

    section named "Progress Dynamics™ 1.1a Service Pack 3/Roundtable Partner

    Package"

    Frank Kjaersgaard

    -Original Message-

    From: Ariel Sorbello

    Sent: Friday, September 27, 2002 10:18 AM

    To: dev@icf.possenet.org

    Subject: RE: SP3 re-release?

    Just to know... is SP3 re-release (SP3.01?) anywhere available for download?

    Thanks.

    -Original Message-

    From: Anthony Swindells

    Sent: Tuesday, August 13, 2002 9:58 PM

    To: dev@icf.possenet.org

    Subject: RE: SP3 re-release?

    sorry but it is still in testing. Will let you know when it is ready, but

    will likely be another week or so.

    Anthony

    Anthony D Swindells

    Lead Architect, Progress Dynamics

    Progress Software Corporation

    aswindel@progress.com

    -Original Message-

    From: Cheryl Field

    Sent: Tuesday, August 13, 2002 8:10 PM

    To: dev@icf.possenet.org

    Subject: SP3 re-release?

    Hi,

    As per the e-mail below, the re-release of SP3 should be available by now

    ...

    The question is - it is re-released yet or not?

    Regards, Cheryl.

    -Original Message-

    From: Frank Kjaersgaard

    Sent: Wednesday, 31 July 2002 6:18

    To: dev@icf.possenet.org

    Subject: RE: Roundtable - Logic Procedures

    The re-release of SP3 is expected to be released by the end of next week.

    Frank Kjaersgaard

    Product Manager

    -Original Message-

    From: John Lindley

    Sent: Tuesday, July 30, 2002 12:34 PM

    To: 'dev@icf.possenet.org'

    Subject: Roundtable - Logic Procedures

    Within Roundtable (Dynamics 1.1A SP3), logic procedures (subtype DLProc)

    have 2 parts; '.p' and '_cl.p'.

    Since logic procedures are stored as entries in ryc_smartobject, should

    Roundtable be storing an additional part for an '.ado' file? This would be

    in keeping with the way other objects (eg. SDO, procedure) are stored.

    Also, we upgraded from SP2 to SP3, and have much of the adm2 missing from

    our Roundtable repository. We have been told (by Progress) that this is due

    to a known issue with the SP2 to SP3 incremental upgrade, and will be

    resolved by a future re-release of this service pack. Can anyone tell me

    when this will be available?

    TIA

    John Lindley

    Videss Ltd.

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

  • Thanks Frank, but... Roundtable Partner service pack wasn't really what I

    was looking for.

    Is SP3 re-release and SP3.01 the same thing?

    I've seen some references to a SP3.01 in the issue list, which seems to have

    corrected some SP3 issues. Question is:..is that SP3.01 package available to

    be applied directly over SP3, or should I just go for the posse_20 download?

    Regards.

    -Original Message-

    From: Frank Kjaersgaard

    Sent: Friday, September 27, 2002 12:10 PM

    To: dev@icf.possenet.org

    Subject: RE: SP3 re-release?

    You can find it at http://www.progress.com/patches/dynamics/index.htm in the

    section named "Progress Dynamics™ 1.1a Service Pack 3/Roundtable Partner

    Package"

    Frank Kjaersgaard

    -Original Message-

    From: Ariel Sorbello

    Sent: Friday, September 27, 2002 10:18 AM

    To: dev@icf.possenet.org

    Subject: RE: SP3 re-release?

    Just to know... is SP3 re-release (SP3.01?) anywhere available for download?

    Thanks.

    -Original Message-

    From: Anthony Swindells

    Sent: Tuesday, August 13, 2002 9:58 PM

    To: dev@icf.possenet.org

    Subject: RE: SP3 re-release?

    sorry but it is still in testing. Will let you know when it is ready, but

    will likely be another week or so.

    Anthony

    Anthony D Swindells

    Lead Architect, Progress Dynamics

    Progress Software Corporation

    aswindel@progress.com

    -Original Message-

    From: Cheryl Field

    Sent: Tuesday, August 13, 2002 8:10 PM

    To: dev@icf.possenet.org

    Subject: SP3 re-release?

    Hi,

    As per the e-mail below, the re-release of SP3 should be available by now

    ...

    The question is - it is re-released yet or not?

    Regards, Cheryl.

    -Original Message-

    From: Frank Kjaersgaard

    Sent: Wednesday, 31 July 2002 6:18

    To: dev@icf.possenet.org

    Subject: RE: Roundtable - Logic Procedures

    The re-release of SP3 is expected to be released by the end of next week.

    Frank Kjaersgaard

    Product Manager

    -Original Message-

    From: John Lindley

    Sent: Tuesday, July 30, 2002 12:34 PM

    To: 'dev@icf.possenet.org'

    Subject: Roundtable - Logic Procedures

    Within Roundtable (Dynamics 1.1A SP3), logic procedures (subtype DLProc)

    have 2 parts; '.p' and '_cl.p'.

    Since logic procedures are stored as entries in ryc_smartobject, should

    Roundtable be storing an additional part for an '.ado' file? This would be

    in keeping with the way other objects (eg. SDO, procedure) are stored.

    Also, we upgraded from SP2 to SP3, and have much of the adm2 missing from

    our Roundtable repository. We have been told (by Progress) that this is due

    to a known issue with the SP2 to SP3 incremental upgrade, and will be

    resolved by a future re-release of this service pack. Can anyone tell me

    when this will be available?

    TIA

    John Lindley

    Videss Ltd.

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org

    To unsubscribe, e-mail: dev-unsubscribe@icf.possenet.org

    For additional commands, e-mail: dev-help@icf.possenet.org